Colección: Productos

6516 Productos

  • AC-LSP-2DR-MER-LCK

    AC-LSP-2DR-MER-LCK

    Two Door Mercury Dual Voltage Integrated Power System supporting two AC-MER-CONT-1DR or one AC-MER-CONT-2DR (Mercury hardware sold separately). The advantage of a dual voltage power supply is the ability to power both Mercury boards and door locks from the same supply. Includes a painted steel enclosure; removable pre drilled back plate; controller standoffs and mounting screws and a 75 watt 12V/2A and 24V/2A power supply-battery charger. The power supply is pre-wired to four Class 2; Power Limited (CL2PL) outputs (C4P Board) delivering a regulated independent power connection to each Mercury board and lock power and control. The power supply features dual outputs (12 & 24volts DC); form ‘C’ fault relay contacts; a fire alarm input and network interface (interface module sold separately) to enable monitoring; reporting and control of the power system from Access Control Manager (ACM) link. Battery space for two 12V; 8Ah batteries is available in cabinet (unless using two AC-MER-CONT-1DR). Cabinet size: 12” x 14" x 4.5" with door lock and two (2) keys. Weight 14 lb.(LifeSafety Power Part Number: FPO75-B100C4PE1M)
  • AC-LSP-4DR-MER

    AC-LSP-4DR-MER

    Four Door Mercury Single Voltage Integrated Power System supporting one AC-MER-CONT-2DR with one AC-MER-CON–MR52 (Mercury hardware sold separately). Includes painted steel enclosure; removable pre drilled back plate; controller standoffs and mounting screws and a 75 watt 12V/6A or 24V/3A power supply-battery charger. The power supply is pre-wired to eight Class 2; Power Limited (CL2PL) outputs (D8P Board) delivering a regulated independent power connection to Mercury boards and auxiliary equipment. The power supply features dual outputs; form ‘C’ fault relay contacts; a fire alarm input and network interface (interface module sold separately) to enable monitoring; reporting and control of the power system from Access Control Manager (ACM) link. Battery space for two 12V; 8Ah batteries is available in cabinet. Cabinet size: 16” x 20" x 4.5" with door lock; tamper switch and two (2) keys. Weight 19 lb.(LifeSafety Power Part Number: FPO75-D8PE2M)
  • AC-LSP-4DR-MER-LCK

    AC-LSP-4DR-MER-LCK

    Four Door Mercury Dual Voltage Integrated Power System supporting one AC-MER-CONT-2DR with one AC-MER-CON–MR52 (Mercury hardware sold separately). The advantage of a dual voltage power supply is the ability to power both Mercury boards and door locks from the same supply. Includes a painted steel enclosure; removable pre drilled back plate; controller standoffs and mounting screws and a 75 watt 12V/2A and 24V/2A power supply-battery charger. The power supply is pre-wired to eight Class 2; Power Limited (CL2PL) outputs (D8P Board) delivering a regulated independent power connection to each Mercury board and four fused output (C4 Board) for independent relay lock power. The power supply features dual outputs (12 & 24volts DC); form ‘C’ fault relay contacts; a fire alarm input and network interface (interface module sold separately) to enable monitoring; reporting and control of the power system from Access Control Manager (ACM) link. Battery space for two 12V; 8Ah batteries is available in cabinet. Cabinet size: 16” x 20" x 4.5" with door lock and two (2) keys. Weight 19 lb.(LifeSafety Power Part Number: FPO75-B100C4D8PE2M)
  • AC-LSP-8DR-MER

    AC-LSP-8DR-MER

    Eight Door Mercury Single Voltage Integrated Power System supporting one AC-MER-CONT-2DR with three AC-MER-CON–MR52 (Mercury hardware sold separately). Includes painted steel enclosure; removable pre drilled back plate; controller standoffs and mounting screws and a 75 watt 12V/6A or 24V/3A power supply-battery charger. The power supply is pre-wired to eight Class 2; Power Limited (CL2PL) outputs (D8P Board) delivering a regulated independent power connection to Mercury boards and auxiliary equipment. The power supply features dual outputs; form ‘C’ fault relay contacts; a fire alarm input and network interface (interface module sold separately) to enable monitoring; reporting and control of the power system from Access Control Manager (ACM) link. Battery space for two 12V; 8Ah batteries is available in cabinet. Cabinet size: 20” x 24" x 6.5" with door lock; tamper switch and two (2) keys. Weight 25 lb.(LifeSafety Power Part Number: FPO75-D8PE4M)
  • AC-LSP-8DR-MER-LCK

    AC-LSP-8DR-MER-LCK

    Eight Door Mercury Dual Voltage Integrated Power System supporting one AC-MER-CONT-2DR with three AC-MER-CON–MR52 (Mercury hardware sold separately). The advantage of a dual voltage power supply is the ability to power both Mercury boards and door locks from the same supply. Includes a painted steel enclosure; removable pre drilled back plate; controller standoffs and mounting screws and a 150 watt 12V/4A and 24V/4A power supply-battery charger. The power supply is pre-wired to eight Class 2; Power Limited (CL2PL) outputs (D8P Board) delivering a regulated independent power connection to each Mercury board and eight fused output (C8 Board) for independent relay lock power. The power supply features dual outputs (12 & 24volts DC); form ‘C’ fault relay contacts; a fire alarm input and network interface (interface module sold separately) to enable monitoring; reporting and control of the power system from Access Control Manager (ACM) link. Battery space for two 12V; 8Ah batteries is available in cabinet. Cabinet size: 20” x 24" x 6.5" with door lock and two (2) keys. Weight 25 lb.(LifeSafety Power Part Number: FPO150-B100C8D8PE4M )
  • AC-LSP-B100

    The B100 Secondary Voltage Module provides a means to easily and economically add an additional voltage to any power system. Primary power for the B100 is derived from an main FPO power supply and the B100 steps the FPO voltage down to the user defined range (typically 12VDC). B100 delivers up to 4A maximum current at 12VDC.(LifeSafety Power Part Number: B100)
  • AC-LSP-C4

    The C4 (4 Door) Lock Control Module adds four (4) fused outputs to a FPO power supply for “buffered” lock control and is typically supplied as part of a system or purchased as an expansion piece to an existing system. The C4 provides four (4) access control inputs capable of voltage or dry contact activation and four (4) relay controlled outputs; individually fuse protected at 3A per output. (LifeSafety Power Part Number: C4)
  • AC-LSP-C8

    AC-LSP-C8

    The C8 (8 Door) Lock Control Module lock adds eight (8) fused outputs to a FPO power supply for “buffered” lock control and is typically supplied as part of a system or purchased as an expansion piece to an existing system. The C8 provides eight (8) access control inputs capable of voltage or dry contact activation and eight (8) relay controlled outputs; individually fuse protected at 3A per output.(LifeSafety Power Part Number: C8)
  • AC-LSP-CAMLOCKSET

    Replacement Camlock and key (set of three) for LifeSafety Power enclosures; keyed alike (Lifesafety Power # Camlock Set)(LifeSafety Power Part Number: Camlock_Set)
  • AC-LSP-CUSTOM

    LifeSafety Power Custom
  • AC-LSP-D8P

    AC-LSP-D8P

    The D8P (8 Out) Power Distribution Module provides 8 auxiliary power outputs; each one individually protected by a solid state circuit breaker (D8P) rated at 2.5A each. Each output is programmable to either of the two voltages available when used in a dual voltage power system; or to the continuous output or the resettable output of the power supply when used in a single voltage system. (LifeSafety Power Part Number: D8P)
  • AC-LSP-E1M

    Backplate; Standoffs & E1M size cabinet kit: Size: 12" x 14" x 4.5"; Weight: 9 lb. (LifeSafety Power Part Number: E1M)
  • AC-LSP-E2-BOXED

    LifeSafety Power E series enclosures are engineered to house FlexPower® power management boards in multiple configurations for maximum design flexibility. The modular mounting pattern on the back wall allows flexible positioning of FlexPower modules within the enclosure. E series enclosures are black powdercoated steel. All enclosures come with installed door ground strap; lockset and tamper switch. 20 x 16 x 4.5'' (510 x 410 x 120 mm) 18 lbs. (8 kg). LifeSafety Part Number: E2-BOXED
  • AC-LSP-E2-BS1

    Locking battery enclosure with one 4" battery shelf. 20x16x4.5 enclosure with pre-installed lock set and tamper switch.
  • AC-LSP-E2M

    Backplate; Standoffs & E2M size cabinet kit: Size: 16" x 20" x 4.5"; Weight: 13 lb. (LifeSafety Power Part Number: E2M)
  • AC-LSP-E4-3BS1

    Locking battery enclosure with three 4" battery shelf. 24x20x4.5 enclosure with pre-installed lock set and tamper switch.
  • AC-LSP-E4M

    8 Door Mercury enclosure with removable backplate Battery space for 12V or 24V; 8Ah batteries is available within the cabinet. Comes with door lock and two (2) keys. Weight: 24 lb. Size: 20" x 24" x 4.5"(LifeSafety Power Part Number: E4M)
  • AC-LSP-E4M1

    16 Door Mercury enclosure with door mount & removable backplate. Battery space for 12V or 24V; 8Ah batteries is available within the cabinet. Comes with door lock and two (2) keys. Weight: 26 lb. Size: 20" x 24" x 4.5"(LifeSafety Power Part Number: E4M1)
  • AC-LSP-E4V

    8 Door HID VertX enclosure with removable backplate *** Accomodates single voltage only *** Battery space for 12V or 24V; 8Ah batteries is available within the cabinet. Comes with door lock and two (2) keys. Weight: 24 lb. Size: 20" x 24" x 4.5"(LifeSafety Power Part Number: E4V)
  • AC-LSP-E4V1

    8 - 16 Door HID VertX enclosure with door mount & removable backplate *** Accomodates single or dual voltage *** Battery space for 12V or 24V; 8Ah batteries is available within the cabinet. Comes with door lock and two (2) keys. Weight: 75 lb. Size: 20" x 24" x 4.5"(LifeSafety Power Part Number: E4V1)
  • AC-LSP-E6M-BOXED

    MCLASS multi-purpose enclosures offer maximum flexibility; functionality and savings to access system designers. MCLASS enclosures are engineered to house FlexPower® power management boards alongside Mercury Security™ access panels (sold separately) in one compact; secure UL294 listed system. The E6M1 enclosures cover a door count from eight to eighteen with dual voltage distribution and network monitoring. To prevent damage to system electronics; the backplate(s) separate from the enclosure for access hardware mounting in the shop while wiring is pulled to the enclosure at the job site. Once configured; the backplate can be remounted for final ties and checkout.
  • AC-LSP-E6M1-BOXED

    MCLASS multi-purpose enclosures offer maximum flexibility; functionality and savings to access system designers. MCLASS enclosures are engineered to house FlexPower® power management boards alongside Mercury Security™ access panels (sold separately) in one compact; secure UL294 listed system. The E6M1 enclosures cover a door count from four to eight with dual voltage distribution and network monitoring. To prevent damage to system electronics; the backplate(s) separate from the enclosure for access hardware mounting in the shop while wiring is pulled to the enclosure at the job site. Once configured; the backplate can be remounted for final ties and checkout.
  • AC-LSP-E8M-BOXED

    MCLASS multi-purpose enclosures offer maximum flexibility; functionality and savings to access system designers. MCLASS enclosures are engineered to house FlexPower® power management boards alongside Mercury Security® access panels (sold separately) in one compact; secure system. The E8M can be configured for a maximum of twelve doors with dual voltage distribution.
  • AC-LSP-E8M2-BOXED

    LifeSafety Power FLEXPOWER E8M2 16 Door Mercury Security® MCLASS multi-purpose enclosures offer maximum flexibility; functionality and savings to access system designers. MCLASS enclosures are engineered to house FlexPower® power management boards alongside Mercury Security® access panels in one compact; secure system. The E8M2 can be configured for a maximum of sixteen doors with dual voltage distribution.To prevent damage to system electronics; the backplates separate from the enclosure for access hardware mounting in the shop while wiring is pulled to the enclosure at the job site. Once configured; the backplates can be remounted for final ties and checkout.